Custom 3D Brass Challenge Coins
Solid brass core. Sculpted 3D artwork. Hard or soft enamel. Dual-plated finishes, diamond-cut edges, and custom shapes. Gray Water Ops produces detailed sculpted metal challenge coins to custom specifications.
Solid brass construction
Gray Water Ops uses brass, not cheaper alloys. Every custom challenge coin is built on a solid brass core. Brass holds fine sculpted detail and accepts standard challenge-coin plating finishes well. Custom plating, color-filled enamel, and finishing are applied on top of the brass core per the specifications of each project.
2D vs. 3D: which does your coin need?
Both 2D and 3D construction have their place, and the right choice depends on the artwork.
Think of a stamped line drawing in metal — artwork is either on the surface or pressed into it. 2D works beautifully for traditional insignia, patch reproductions, text-heavy designs, department seals, and heraldic artwork. It is often faster to produce and reads cleanly at a glance.
Artwork is modeled with curved, dimensional surfaces so figures, aircraft, badges, and portraits appear three-dimensional. 3D is the right call for coins featuring vehicles, animals, people, buildings, or anything where depth and modeled form make the artwork come alive.
Many coins combine both: a 3D central element with 2D text and insignia around it.
Finishes, plating, and enamel
- Standard plating. Antique brass, antique silver, antique copper, gold, and nickel.
- Dual-plated finishes. Two plating tones on the same coin, used to highlight different artwork regions in contrasting metals.
- Hard enamel. Color is polished flush with the metal surface for a smooth, premium finish; best for high-contrast, long-wear coins.
- Soft enamel. Color sits slightly recessed below the raised metal; produces a textured, more tactile result and allows finer color detail.
- Glow-in-the-dark and translucent enamel. Available for specific design elements where appropriate.
Edges, shapes, and construction options
- Edge treatments: diamond-cut, rope, oblique, standard milled, and custom edge inscriptions.
- Custom shapes: round is traditional, but we regularly produce shields, dog tags, badges, aircraft silhouettes, state outlines, spearheads, and unit-specific custom cuts.
- Cutouts: through-cut artwork for silhouetted elements.
- Multi-piece construction: moving parts, spinners, and bottle openers where the design calls for it.
Dimensions and specifications
A standard custom challenge coin is approximately 1.75 to 2 inches in diameter and roughly 3mm thick. Both dimensions can be adjusted for specific commissions. Smart Coin® NFC-enabled coins are typically produced at 2 inches to accommodate the embedded chip and clear epoxy insert.
For any custom build we will confirm final dimensions, weight, and tolerances during the proof phase before production begins.
Artwork preparation and proofing
Reference material supplied by the customer — logos, patches, badges, photos, concept sketches — is translated into die-ready artwork. That process includes scaling line weights, simplifying detail that will not survive at die size, resolving color placement for enamel, and marking plating areas.
A proof is provided for customer approval before dies are cut.
Printed coins vs. struck sculpted metal coins
A printed coin has artwork printed onto a flat metal blank, sometimes sealed under epoxy. A struck sculpted metal coin has artwork physically raised, recessed, and plated into the brass itself. The two are different products with different manufacturing processes and different finished appearances. Gray Water Ops specializes in struck sculpted metal coins.
Frequently asked questions
What is the difference between 2D and 3D coins?
2D artwork is flat raised and recessed detail. 3D artwork is sculpted with curved, modeled surfaces. Many coins combine both.
What is a standard coin size?
Approximately 1.75 to 2 inches in diameter and 3mm thick, adjustable per commission.
Can you do custom shapes?
Yes — shields, dog tags, aircraft silhouettes, state outlines, and unit-specific cuts are all available.
How do I get pricing?
Pricing depends on quantity, size, plating, enamel, and whether NFC is included. Submit a quote request at graywaterops.com/get-a-quote.